| 变频器恢复出厂参数是什么 |
| 添加时间：2018/3/10 17:05:16 浏览次数： |
| 1、变频器恢复出厂参数是什么? 1. What is the recovery of the factory parameters by the frequency converter? FP-01=1 FP-01=1 2、请问变频器F1电机参数中【电机漏感抗】是指定子漏感抗还是转子漏感抗? 2, please F1 inverter motor parameters in motor [] refers to the leakage inductance of stator leakage inductance and rotor leakage inductance? 定子漏感抗=转子漏感抗=电机漏感抗 The stator leakage inductance = rotor leakage inductance = motor leakage inductance 3、变频器能否查看之前的故障信息? 3. Can the frequency converter check the previous fault information? 可以，比如MD380可以通过参数F9-14~F9-17查看最近的三次故障代码信息。 Yes, for example, MD380 can see the latest three fault code information through the parameter F9-14~F9-17. 4、MD200的A组参数说明书中有，但是变频器里看不到? 4, MD200 A group parameter instructions, but can not be seen in the frequency converter? A0组为默认隐藏组参数，设置FP-02=111即可(十位为A组参数显示，个位为U组参数显示;FP-02默认为1)。 The A0 group is the default hidden group parameter, and the FP-02=111 is set (ten bits are displayed for A group parameters, the bits are displayed for U group parameters; the default is 1). 5、MD300的说明书中F0-13(DO输出选择)只有0-3，为什么变频器中有4这个选项? 5, the F0-13 (DO output selection) in MD300's specification is only 0-3. Why is there 4 in the frequency converter? MD300的14#FDT功能非标中有功能4：FDT功能选择。 MD300's 14#FDT function non - standard has functional 4:FDT function selection. 6、MD330中FH-65(锥度模式)的两种锥度模式如何计算? 6, how do the two taper modes of FH-65 (taper mode) be calculated in MD330? 1.FH-65=0曲线锥度是按照F=F0(1-K*(D0+D1)/(D+D1))的曲线 The taper of the 1.FH-65=0 curve is according to the curve of F=F0 (1-K* (D0+D1) / (D+D1)) 2.FH-65-1直线锥度则是按照FH-61~FH-64的锥度拐点及张力锥度来决定的; The 2.FH-65-1 linear taper is determined by the taper of FH-61~FH-64 and the taper of tension. 3.注意：MD330中FH-09(张力锥度)只适用于收卷模式。 3. note: the FH-09 (taper of tension) in MD330 is only applicable to the winding mode. |
| 上一页 变频器（VFD）是应用变频技术与微电子技术 |
| 下一页 变频调速的原理 |
Copyright © 技术支持：遨游网络